SVTSPLASH98

I have a 2004 Mach 1 And i Want To Weld In Some Flowmasters.. My Question is When I Order The Mufflers What Size Do I Get... 2.25 or 2.50?

97tplsGT

you can use either, i would get 2.5 in case you want to upgrade the rest of your exhaust later

sprostang

Your better off getting the full catback. IMO. Your stock exhaust it 2 1/4. If you do get just the mufflers, you can order either size. If you get 2.5`s, you`ll just need an adapter for them to be welded on.

SVTSPLASH98

Thanks......

laserred38

....suck

lsustang04

Man I wouldn't just get them welded in go ahead and get the full catback. Get rid of that crappy ford stock piping back there.

97targa

If you weld them in get the 2-1/4". They are the same length as the stockers so adapters will screw you up. Also you wanna get inlet offset and outlet offset!

Black_GT_02

try ebay...i got mine for 110 shipped.

Fizzics Boy

save your money and get a full catback. i recommend a bassani one. my friend has it on his mach and i need to change my pants everytime i hear it . it is expensive but its money well spent.

laserred38

+1...Flows are SO overrated...but if they sound good to you then go ahead...to ME Bassani sounds the best on the 4.6...hands DOWN...i would definitely pay top dollar for mid-lengths, catted x and catback from bassani