ih8chevy

hey guys been really thinkin hard about gettin a sn95 gt, cause i love the body style and i like the 4.6, the questions are
1) what gets better gas stock typically the cobra or gt
2) what good would stage 1 cams do on a gt
3) could i just put pi heads on the gt or do i have to do the intake as well


thanks guys

nanaki

1. depends on your foot
2. cacunk cacunk cacunk!!!
3. yes

96GT226410

The GT gets slightly better fuel economy as from what I'm told. I've never had the privelage of owning a Cobra. .... Stage 1 cams could give you 25 hp on stock heads.... The intake has to match the heads.

ih8chevy

so the cams would do very little, and the intake has to go on with the heads

96GT226410

25 hp on a stock car isn't that little. If you want, get stage 2 heads. They'll yield almost 40 hp on a stock engine. And yeah, the intake needs to be a PI type.

nanaki

if you live around northern virginia, i'll hook you up on a deal for my shortblock (with 28k miles on it) with heads and cams already on it. ready for a swap.

97tplsGT

yeah, if you do the heads, you have to do the intake and cam, you can do the intake by itself, or just the intake and cams, depending on your pocket

JJ03MustangGT

the cobra gets about identical gas mileage unless of course its an 03-04, but even then its not bad.

if your gonna do pi heads you might as well do the intake. your shortin yourself because the pi intake is very restrictive. but as far as i know i dont think the pi heads match the npi intake but i could be wrong.

ih8chevy

i live in west chester pa which is only a 6 hour drive from virginia my freiend goes to vcu and he says it aint a bad drive, whats done to the motor exactly

nanaki

yeah, that's not that far at all really.

it's nothing but my old stock shortblock. i swapped it out at 28k miles (last week actually) for a new forged shortblock with new heads and cams. so i have all that crap on it and ready to go.