pi head specs
02-11-2007, 02:24 PM
#11
5th Gear Member
Join Date: Apr 2005
Location: South Jersey
Posts: 2,489
RE: pi head specs
The valves are too close together, thats a design flaw that is a compromise for the small 3.552 bore size of the modular engine. If the bore was larger like 4.0 on a 5.0Lthen the valves could be bigger and spread apart unshrouding them and flowing better.
The SVO/FRPP heads have relocated valves to promote better flow...these are your best option. And flow #'s don't alway = HP so don't get caught up in that.
The SVO/FRPP heads have relocated valves to promote better flow...these are your best option. And flow #'s don't alway = HP so don't get caught up in that.
Thread
Thread Starter
Forum
Replies
Last Post
