x-pipe and UDP's pulleys installed! Tested at track!
02-18-2007, 09:35 PM
#1
2nd Gear Member
Thread Starter
Join Date: Oct 2006
Location: Boynton Beach
Posts: 298
x-pipe and UDP's pulleys installed! Tested at track!
Ok so friday night I installed my UPR x-pipe and Steeda UDP's and sat night went to the track and ran a 13.8 at 100mph with a 2.1 60ft with a .194 R/T. Not bad considering I only got a ebay CAI, x-pipe, and the UDPs with an automatic. I think with a set of nitto 555r street drags I could of got a mid 13 second pass.....
02-18-2007, 09:38 PM
#3
2nd Gear Member
Thread Starter
Join Date: Oct 2006
Location: Boynton Beach
Posts: 298
RE: x-pipe and UDP's pulleys installed! Tested at track!
ORIGINAL: StangEatsRice
Get a set of 410 gears and u be in mid 13's radials.... mid to low 13's
Get a set of 410 gears and u be in mid 13's radials.... mid to low 13's
02-18-2007, 09:41 PM
#5
4th Gear Member
Join Date: Nov 2005
Location: NJ
Posts: 1,494
RE: x-pipe and UDP's pulleys installed! Tested at track!
yea I am putting gears in soon but I am gonna be a little different and go with the motive 3.90's
02-18-2007, 09:42 PM
#6
3rd Gear Member
Join Date: Sep 2005
Location: Oregon
Posts: 735
RE: x-pipe and UDP's pulleys installed! Tested at track!
wow thats a helle good time considering your mods. My brother has a 99 gt auto with 4:10's, lower controls arms, CAI, tb/plenum, h pipe, flowmasters. Im thinking that if he gets some 315's or dr's he will touch mid 13's.
02-18-2007, 09:43 PM
#7
2nd Gear Member
Join Date: Oct 2006
Location:
Posts: 235
RE: x-pipe and UDP's pulleys installed! Tested at track!
ORIGINAL: meebix
yea I am putting gears in soon but I am gonna be a little different and go with the motive 3.90's
If you like the track and plan on staying N/A... you are going to regret that decision.
yea I am putting gears in soon but I am gonna be a little different and go with the motive 3.90's
02-18-2007, 10:01 PM
#9
2nd Gear Member
Thread Starter
Join Date: Oct 2006
Location: Boynton Beach
Posts: 298
RE: x-pipe and UDP's pulleys installed! Tested at track!
ORIGINAL: freefallin98
wow thats a helle good time considering your mods. My brother has a 99 gt auto with 4:10's, lower controls arms, CAI, tb/plenum, h pipe, flowmasters. Im thinking that if he gets some 315's or dr's he will touch mid 13's.
wow thats a helle good time considering your mods. My brother has a 99 gt auto with 4:10's, lower controls arms, CAI, tb/plenum, h pipe, flowmasters. Im thinking that if he gets some 315's or dr's he will touch mid 13's.
02-18-2007, 10:09 PM
#10
2nd Gear Member
Join Date: Oct 2006
Location:
Posts: 235
RE: x-pipe and UDP's pulleys installed! Tested at track!
Even with a 75 shot the gearing wont matter. Since it doesnt fire off the line traction wont be an issue and i doubt u'll run outta gear before the 1/4 mile line