HamMach1

Well it looks like it's time to replace the clutch. I think the attempted burnout that I did a few nights ago used what was left of it. Now, I smell that burning smell constantly so I figured it has to go. I don't want to just take it to the dealer and get a new factory clutch, I'd rather step outside of the box and use an aftermarket one. Any suggestions of clutches out there that won't make my ride miserable? My Mach is basically stock with exhaust/intake so I don't need a clutch that's meant for the 400+ horses out there. Thanks!!

geetee03

get a better clutch than you think you need. fried it learning the stick eh?

HamMach1

Heh

HamMach1

I was thinking something from SPEC but I've heard nothing but good things about King Cobra's clutches I just don't know what stage to go with.

Mark99GT

Spec stage 1 or king cobra. Heard great things about both.

uberstang1

yea spec or a king would be just fine

HamMach1

So a stage 1 clutch is what I should be looking at?

uberstang1

The spec stage 1 is rated for 410tq

HamMach1

ALright thanks. That would probably fit me best since I wont be in that torque range for a while.

97tplsGT

Future Mods: Good manual driver <<<< perfect for this thread



King or Spec, either, good luck