4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Steeda Full length subframes...

Thread Tools
 
Search this Thread
 
Old 02-23-2007, 06:36 PM
  #1  
LasrRd00GT
Thread Starter
 
LasrRd00GT's Avatar
 
Join Date: Nov 2006
Location:
Posts: 34
Default Steeda Full length subframes...

Are they worth it or not? whats the good and bad to them?
LasrRd00GT is offline  
Old 02-23-2007, 06:48 PM
  #2  
jacrockett
3rd Gear Member
 
jacrockett's Avatar
 
Join Date: Feb 2005
Location: Anaheim, CA
Posts: 616
Default RE: Steeda Full length subframes...

Subframes are a must for verts. Make sure to get "full length" and have them welded.
jacrockett is offline  
Old 02-23-2007, 06:56 PM
  #3  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Steeda Full length subframes...

ORIGINAL: LasrRd00GT

Are they worth it or not? whats the good and bad to them?
Yes they are worth it especially if you are going to do any power adders down the road. You want to be able to close your doors don't ya?
lizzyfan is offline  
Old 02-23-2007, 07:07 PM
  #4  
ratherBracin
1st Gear Member
 
ratherBracin's Avatar
 
Join Date: Jan 2007
Location:
Posts: 106
Default RE: Steeda Full length subframes...

The items you just posted (control arms and subframe connectors) are the same items I am about to order. I have ordered a lot of stuff from Steeda and it has all been good and both of the items you are asking about are well worth it.
ratherBracin is offline  
Old 02-23-2007, 07:13 PM
  #5  
LasrRd00GT
Thread Starter
 
LasrRd00GT's Avatar
 
Join Date: Nov 2006
Location:
Posts: 34
Default RE: Steeda Full length subframes...

well i know steeda is a very reputable name, not only a happy steeda consumer but my main concern was wether to get stiffer axle housing bushings for the stock upper rear control arms or just get the steeda c/a's because i dont want to pay 150 for something that couldve performed similar while paying 40 for bushings...
LasrRd00GT is offline  
Old 02-23-2007, 07:21 PM
  #6  
ratherBracin
1st Gear Member
 
ratherBracin's Avatar
 
Join Date: Jan 2007
Location:
Posts: 106
Default RE: Steeda Full length subframes...

No they should do more than that. The aftermarket control arms should be a slightly diffenent length to chang the angle.
ratherBracin is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TCStangerv6
Street/Strip
12
10-11-2015 05:57 PM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
tj@steeda
Florida Regional Chapter
0
09-30-2015 08:04 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM



Quick Reply: Steeda Full length subframes...



All times are GMT -5. The time now is 02:27 AM.