BETTER STAGE ONE CAM VID
02-27-2007, 11:34 PM
#1
3rd Gear Member
Thread Starter
Join Date: Jul 2006
Location: Connecticut
Posts: 720
BETTER STAGE ONE CAM VID
this one i rev the car to about 4 grandish...dont wanna go any higher till i get it tuned, but yeah here it is VT stage 1s
http://www.youtube.com/watch?v=FiORn4_OQ_Y
http://www.youtube.com/watch?v=FiORn4_OQ_Y
02-28-2007, 12:41 AM
#7
3rd Gear Member
Thread Starter
Join Date: Jul 2006
Location: Connecticut
Posts: 720
RE: BETTER STAGE ONE CAM VID
cams, valve springs, retainers obviously, machine work and instal 2g, if you get the stage one cams, you DONT need to do the valve springs, in which case the heads can stay on, and the job is only a couple hundred bucks, i just opted to do the springs...just because, but yeah its not nessisary
02-28-2007, 12:43 AM
#8
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 284
RE: BETTER STAGE ONE CAM VID
ORIGINAL: yelw02GT
cams, valve springs, retainers obviously, machine work and instal 2g, if you get the stage one cams, you DONT need to do the valve springs, in which case the heads can stay on, and the job is only a couple hundred bucks, i just opted to do the springs...just because, but yeah its not nessisary
cams, valve springs, retainers obviously, machine work and instal 2g, if you get the stage one cams, you DONT need to do the valve springs, in which case the heads can stay on, and the job is only a couple hundred bucks, i just opted to do the springs...just because, but yeah its not nessisary
02-28-2007, 12:46 AM
#9
3rd Gear Member
Thread Starter
Join Date: Jul 2006
Location: Connecticut
Posts: 720
RE: BETTER STAGE ONE CAM VID
well its still untuned so its still pretty choppy and i dont really wanna beat the dick off of it before i get it tuned but from just messin around a little bit, its got a noticablely harder pull in the upper end
