Triisomy21

think about getting some stronger axles too

stangman94

yes a tune

Mark99GT

+1

31 spline axles and 31 spline diff. Maybe some 3.55 or 3.73 gears too.

bullittracr

haha if money isnt a problem, could you lend me some to get my kenne bell pa pa pa pa pa please. haha good luck with the modding sounds like fun wish i could have money to blow like that.

CobraSnake

just buy three turbo's and give me one. Us folks that have no money could use some extra help.

oxfordgt

Here is my set up:
forged shortblock (bored .020 over) with 18cc pistons
stage 2 2valve heads

buying hp stage II twin turbo setup
TKO 600
31 spline axels

Roush stage II suspension is nowhere near good enough for that kinda power.

racer02GTstang

its possible to get 600hp with a blower if you wanted to save some money... get a s trim or prefreably a T-trim vortech... it will make 600hp with internals, heads and cams...

but twin turbo is cooler and more efficient.. and will make much more power if you want it...

i'd say forged shortblock... some set of ported heads.. stage 2-3 cams... and a built tranny (like tko500)... then some axles, differential.. and some slicks for the track.. would make it a fun car.. also dont forget some suspension work to help launching... for the pistons.. i would say you need a 18-22cc dish... i have 18cc and its 9.0 compression... 22 should be about 8.5 which is good too for a boosted car.

mylongvictor

Look at the sig........ 600rwhp was only about another $1,500.00 for me.... lol

^iLLuSiOn^

not telling them your running a 400 shot on the street is even better.... be nice to see there faces when you whoop there *** with a "stock" car

04mineralgreyGT

Alot of people do. We call them RICERS [8D]