Changing Tail Light '99
#1
2010 Blue Ball Award Recipient
Thread Starter
Join Date: Dec 2004
Location: Eskimo Village, Indiana *No Igloo*
Posts: 7,907
Changing Tail Light '99
Had a taillight out since I bought the car in '04 So yea, I've had teh annoying Super Blinker for the whole time anytime I want to turn right.
Took off the back trunk panel *inside* today while cleaning since I was feeling ambitious. Now, what else has to come off to get to the tail light so that I can change it? I am 99.9% sure it's the middle of the 3 lights, so I don't know how to gain access to it.
Has anyone changed their own taillights, how'd they do it? I know the retarded book tells you to 'See An Authorized Ford Specialist so They can Rape You.. OH THE BABY"
I have a picture of what it looks like right now.
Took off the back trunk panel *inside* today while cleaning since I was feeling ambitious. Now, what else has to come off to get to the tail light so that I can change it? I am 99.9% sure it's the middle of the 3 lights, so I don't know how to gain access to it.
Has anyone changed their own taillights, how'd they do it? I know the retarded book tells you to 'See An Authorized Ford Specialist so They can Rape You.. OH THE BABY"
I have a picture of what it looks like right now.
#4
RE: Changing Tail Light '99
Yup! you have to take out the nuts that you see there, & pull the whole light assembly out to change the bulbs. You think thats bad??. On my `87 Vette, you have to remove the license plate, & take out the backup light assembly, then reach in blindly to remove the bulbs. I guess GM figured that the bulbs would last forever
#5
2010 Blue Ball Award Recipient
Thread Starter
Join Date: Dec 2004
Location: Eskimo Village, Indiana *No Igloo*
Posts: 7,907
RE: Changing Tail Light '99
so let me get this right..
i take out those 3 bolts from behind, and the assembly goes out the rear *as in the whole light assembly* and then i can just take out the bulbs??
thats not too bad if im not mistaken on what i have to do
i take out those 3 bolts from behind, and the assembly goes out the rear *as in the whole light assembly* and then i can just take out the bulbs??
thats not too bad if im not mistaken on what i have to do
#7
RE: Changing Tail Light '99
Come on n000b! Just unscrew the bolts that are clearly visible, the ones with the long studs...don't you have a Haynes manual or something?
I would never expect a question like this from you Cliftness....[:-]
I would never expect a question like this from you Cliftness....[:-]
#8
2010 Blue Ball Award Recipient
Thread Starter
Join Date: Dec 2004
Location: Eskimo Village, Indiana *No Igloo*
Posts: 7,907
RE: Changing Tail Light '99
I would never expect a question like this from you Cliftness....
I'm switching things up, keeping it interesting, while at the same time insuring that I don't break anything.
#10
RE: Changing Tail Light '99
I have changed my tail lights twice, and took them apart again to fix the blinker issue.
Dirtystang is almost right, it is four bolts. Then the whole housing comes out then you can gain access to the bulbs.
Dirtystang is almost right, it is four bolts. Then the whole housing comes out then you can gain access to the bulbs.