what should i expect?
03-11-2007, 10:35 PM
#1
2nd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 246
what should i expect?
i am going to the track on the 25th...and im hoping for the best. i have full bolt ons minus catback. i have weld in flowmasters. my car made 254 or 256 on all motor ....best the car went on not so good street tires was 13.592
with a 2.048 60 foot and 8.772 1/8 mile.....the MPH on the 13.592 was 101.769
since then i have added nitto drag radials and a jlt cold air intake. what should i be expecting? oh and im gettin it dyno tuned on the 17th by modular depot. what kind of time should i see?
i ran a 12.10 with 125 shot of nitrous on the nittos with a 1.7x 60 foot
what kind of 60 and 1/4 will i get all motor? and what should i set the 2 step at?
with a 2.048 60 foot and 8.772 1/8 mile.....the MPH on the 13.592 was 101.769
since then i have added nitto drag radials and a jlt cold air intake. what should i be expecting? oh and im gettin it dyno tuned on the 17th by modular depot. what kind of time should i see?
i ran a 12.10 with 125 shot of nitrous on the nittos with a 1.7x 60 foot
what kind of 60 and 1/4 will i get all motor? and what should i set the 2 step at?
03-12-2007, 04:24 AM
#8
6th Gear Member
Join Date: Nov 2004
Location: Tennessee
Posts: 7,797
RE: what should i expect?
You having little to no suspension mods (that I can see) I'm gonna say that 12.99 is a tad out of reach.
If you could duplicate the nitrous launch (1.7's) It could be done, its just hard to imagine a stock suspension car pulling 1.7's on a half-*** drag tire. Must be Stage 3 driver mod.
If you could duplicate the nitrous launch (1.7's) It could be done, its just hard to imagine a stock suspension car pulling 1.7's on a half-*** drag tire. Must be Stage 3 driver mod.
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
09-28-2015 07:03 AM