Clutch Sugestion

Reply Subscribe

Thread Tools

Search this Thread

03-17-2007, 11:39 AM

#11

djb1187

5th Gear Member

Thread Starter

Join Date: Dec 2005

Location:

Posts: 2,791

RE: Clutch Sugestion

Quote:

ORIGINAL: HaV

Quote:

ORIGINAL: djb1187

well i have the spec clutch for a 01.5+-04 since my car is a late 01 but i had a t45 for some reason. would that cause all my problems?

yes! Thats your problem right there.. you have the wrong setup... how did they even get htat to work? did the replace the flywheel, etc? thats.. very odd..

I have a spec stage 3 and I really never had any chatter.. just a tiny bit when taking off before I got used to the slip point.... spec's are usually really good about not chattering.

no it bolted right up to it. I didnt replace it only had it resurfaced. But my OASIS sheet from ford said i had a tr3650 and i have the late model 01. I dont know. Because my stock clutch was the same size as my 11" spec. so that couldnt be the problem. I hear these weird noises from it all the time and it smells horrible whenever I park. Somethings badddd about it reall baddd

03-17-2007, 11:40 AM

#12

djb1187

5th Gear Member

Thread Starter

Join Date: Dec 2005

Location:

Posts: 2,791

RE: Clutch Sugestion

Quote:

ORIGINAL: Car_Ramrod

i dont know about the t45...but the 3650 has 10 spline and the t56 has 26 spline.

you sure the t56 hs a 26 spline. Everyone keeps telling me I can use the terminator clutch. MRT told me when I went up there. I know the t45 has a 10 spline because I have the Spec Clutch for the 3650 equipped cars. Since mine had the flywheel and clutch just not the trans for some reason.