drive train install
03-25-2007, 07:49 PM
#1
Thread Starter
Join Date: Feb 2007
Posts: 4
drive train install
hey is it easy to install a new aluminum drive train on my GT on my own? im not a genius under the hood by no means but im able to figure things out the more i mess with it. but i dont wanna screw up my drive train by putting it on myself. basically does anyone know if there will be any unexpected suprises putting this thing on by myself? and what i should expect once im under there?thanks!
03-25-2007, 08:00 PM
#2
2nd Gear Member
Join Date: Dec 2006
Location: SinCinnati
Posts: 323
RE: drive train install
Drive shaft ? Actually very very easy to do.
Remove the bolts by the rear end , pull the shaft from the rear of the tranny and pop in the new one..Jack it up from the rear so it leans towarsds the font.Some fluid will drip out of the tail of the tranny.
Remove the bolts by the rear end , pull the shaft from the rear of the tranny and pop in the new one..Jack it up from the rear so it leans towarsds the font.Some fluid will drip out of the tail of the tranny.
Thread
Thread Starter
Forum
Replies
Last Post