4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Getting Flowmasters Tuesday...question??

Thread Tools
 
Search this Thread
 
Old 03-31-2007, 02:44 AM
  #1  
mikemic
Thread Starter
 
mikemic's Avatar
 
Join Date: Jan 2007
Location:
Posts: 25
Default Getting Flowmasters Tuesday...question??

I am replacing the stock mufflers on my 04 GT with Flowmasters. I actually like the sound of the stock exhaust, but want something a bit louder. Thanks to everyone who posted exhaust clips. Does $200 for mufflers plus labor sound ok? I checked 3 places and they were all within $10 of one another and all keep the Flows in stock.
mikemic is offline  
Old 03-31-2007, 02:45 AM
  #2  
LX90
2nd Gear Member
 
LX90's Avatar
 
Join Date: Jan 2006
Location:
Posts: 408
Default RE: Getting Flowmasters Tuesday...question??

$200 plus labor? Is it just the mufflers or a cat back? I paid $180 for mine cat-backwith dumps installed.
LX90 is offline  
Old 03-31-2007, 02:46 AM
  #3  
RC5522
2nd Gear Member
 
RC5522's Avatar
 
Join Date: Dec 2006
Location: SinCinnati
Posts: 323
Default RE: Getting Flowmasters Tuesday...question??

If its a cat back you can do it with a jack... and two or three tools and some wd-40 screw paying to have that sh it installed
RC5522 is offline  
Old 03-31-2007, 02:49 AM
  #4  
RC5522
2nd Gear Member
 
RC5522's Avatar
 
Join Date: Dec 2006
Location: SinCinnati
Posts: 323
Default RE: Getting Flowmasters Tuesday...question??

If its the new 40flowmaster series cat back the pipes are already welded to the mufflers.
So all you have to do is jack the car up put some jack stands on each side of the frame and let the rear end drop for the tail pipe clearence. Unbolt the stock from the mid pipe back..I used a sawz all on the tails just to get em out quick..... Its a rather fun project man you should attempt it.
RC5522 is offline  
Old 03-31-2007, 02:50 AM
  #5  
RC5522
2nd Gear Member
 
RC5522's Avatar
 
Join Date: Dec 2006
Location: SinCinnati
Posts: 323
Default RE: Getting Flowmasters Tuesday...question??

Man I keep thinking of stuff after the fact. lol
If you are just having the two mufflers put on 200 is to much...
RC5522 is offline  
Old 03-31-2007, 02:51 AM
  #6  
LX90
2nd Gear Member
 
LX90's Avatar
 
Join Date: Jan 2006
Location:
Posts: 408
Default RE: Getting Flowmasters Tuesday...question??

ORIGINAL: RC5522

Man I keep thinking of stuff after the fact. lol
If you are just having the two mufflers put on 200 is to much...
Yeah that's what I was thinking too, way to much just to have 4 welds made.
LX90 is offline  
Old 03-31-2007, 02:52 AM
  #7  
RC5522
2nd Gear Member
 
RC5522's Avatar
 
Join Date: Dec 2006
Location: SinCinnati
Posts: 323
Default RE: Getting Flowmasters Tuesday...question??

Where you going to a midas or something ?
RC5522 is offline  
Old 03-31-2007, 02:54 AM
  #8  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Getting Flowmasters Tuesday...question??

200 for weld-ons is right!
lizzyfan is offline  
Old 03-31-2007, 02:55 AM
  #9  
LX90
2nd Gear Member
 
LX90's Avatar
 
Join Date: Jan 2006
Location:
Posts: 408
Default RE: Getting Flowmasters Tuesday...question??

ORIGINAL: lizzyfan

200 for weld-ons is right!
That just seems so high to me....oh well.
LX90 is offline  
Old 03-31-2007, 02:58 AM
  #10  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Getting Flowmasters Tuesday...question??

ORIGINAL: LX90

ORIGINAL: lizzyfan

200 for weld-ons is right!
That just seems so high to me....oh well.
How??? They are about 65-70 a piece,130-140 then labor, you do the math!
lizzyfan is offline  


Quick Reply: Getting Flowmasters Tuesday...question??



All times are GMT -5. The time now is 09:20 AM.