Nitti00GT

Does anyone know the torque specs and the tightening sequence on the cam caps for a 2000 GT?

oxfordgt

Give me a sec.

Nitti00GT

Sweet, you are a huge help.

oxfordgt

having trouble getting the pic to work.
89in lbs work from the center out.

Nitti00GT

ok. I don't have an inch pound torque wrench.Is there aNm or lbs conversion?

oxfordgt

Got it to work

[IMG]local://upfiles/37288/C9D7938A8EF2449E86FD8A4847807DED.gif[/IMG]

Nitti00GT

Sweet thanks again.

Nitti00GT

Ok the driver's side cam is still hard to turn. I really don't think the caps are in the same place as they came off even though I laid them out in order when I took everything apart. Also I have a 2000 so both cams look a like. The only difference is there is a raised notched on one of the cam sprokets. Which side does that go on?

Jskeezy84

so your doing the install right now?? nice. is it turning out to be a pita or is it going smoothly????

Nitti00GT

Well it wasn't a pita til now. The whole dissasembly wasn't too hard. Installing and torqueing the heads was pretty easy. The cams got mixed up so idk what side is what now (shouldn't be hard though someone must know). Just waiting on the timing cover gasket since they sent me one for a V6.