Will a TR-3650 Just "Drop-In" a 1999 GT?
 

Since it will end up costing too much to have my t45 rebuilt, the 3650 is another option. Is this a direct drop-in and go replacement in a 99 GT? I know the speedo gear (or is it the entire speedometer sensor unit) has to be replaced, but is there anything else?

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

no, it bolts right in, just gotta rewire your reverse lights

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

dustin you beat me to it i was going to have him send you a pm

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

lol btw man get on aim

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

Dont buy the 3650 is a POS..:D. save and buy the TKO500.

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

There is a difference in where the shifter mounts on newer 3650's. From the pics i've looked at, the newer ones have a shifter that hangs off the back of the transmission, instead of being right above the mount. I'm not sure what year they changed in though. Also, I've heard there is a ring in the speedometer sensor(or the sensor itself) that needs to be changed.

Are the shifters compatible?



The 3650 is a POS compared to the t45? I thought it was the better of the two. I definately can't afford a TKO, and I just wanna get my car back on the road.

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

naw man the 3650 is a POS but wayyyyyyyyyy better than the ultimate POS the t45. I just did the swap on mine

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

Is your mount on the very end of the transmission, and the shifter right above it? Or does your shifter hang off the back? I think 01 has a different mount than 99. Mine uses the one like this(says 96-04, but I know they were different in 96-98 at the least)...

http://cgi.ebay.com/ebaymotors/ENERG...7410QQtcZphoto

Scroll down to the bottom for the best pic.

What all was required to swap yours out?

RE: Will a TR-3650 Just "Drop-In" a 1999 GT?
 

the shifter sits slight higher than the trans and its in the middle of the tail shaft on the 3650. the mount will b fine on a 99. just make sure the 3650 didnt come out a 05+. all i needed was a shifter