jst854

I am planning on swapping in a pi intake. What other parts do I need besides the intake?

gt96stang

give randy over at MD a holler and let him know what you got (alum crossover/regular) and he'll be able to set you up with everything that you will need

96GT226410

Gaskets, coolant tube and nipple to fit the new intake, and some regular hand tools. A tool for the fuel lines would make it a lot easier.

jst854

How can I contact randy at MD?

roush17

I would go ahead and do the heads and cams if you have the cash.

gt96stang

over into their forums and into ford factory parts..

96GT226410

www.modulardepot.com

jst854

I am also considering doing the cams, but not really interested in the heads. From what I have read you only gain around 10 hp from the heads and that does not seem worth it to me for the cost and labor involved.

96GT226410

10hp on a stock engine. When you start doing more mods the hp is increased a lot more than compared to NPI heads.

richinwa

Follow this link, it gives you the particulars on what you are trying to do.
http://www.moddedmustangs.com/forums...ap-vt1878.html