procharger intercooler
04-22-2007, 01:27 AM
#1
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location: N. Ft. Myers, Fl
Posts: 1,329
procharger intercooler
k guys i'm looking at doing a DIY intercooler but i dunno how to route the pipes and such. If anyone knows how and has a pic or something on how to do this i would appreciate it greatly! Also Does anyone know the dimensions of the 3 core intercooler procharger uses? I know there isnt alot of room in the stock gt bumper and i figured if i copy ati's as close as possible it'd be easier
04-22-2007, 01:50 PM
#4
4th Gear Member
Join Date: Mar 2005
Location: Florida
Posts: 1,881
RE: procharger intercooler
post this is Pipes, Boost, and Juice. i know Nanaki was looking into it and had called Procharger regarding pricing on piping and such. post there or shoot him a pm or something, hes probably the most knowledgeable on this.
04-22-2007, 02:02 PM
#6
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: procharger intercooler
T his is a PM I got on another forum asking questions about a DIY install:
Here is aquote from the same forum on the demisions of the ati intercooler:
DIY intercooler page, just check out the entire page its real long, but there ar epics on 3 and 4:
http://www.modularpowerhouse.com/for...cooler+project
dont have tha auction #'s sorry. One mistake i made was getting 2.5 piping. It is restricting boost so im making 7 psi with a 3.1 pulley instead of 10psi like the paxton intercooler guys make. buy 3 inch universal polished piping with couplers. and i got a 24x12x3 intercooler with 2.5 inlets. get the 3" inlets not the 2.5 on the core. i will post pics next week when i get my camera. its not an easy project. you need to cut a hole in the body of the car next to the powerpipe to run the cold side of the piping. the piping from the blower just goes down into the fender and wraps around. i had to relocate powersteering lines to mount the core. its a cxracing intercooler. try cxracing.com. if u have any more question feel free to ask. Go to the thread dyi intercooler project. I did mine the same as his and he has pics
Height – 17 inches
Length – 28 inches
Width – 3 inches
Width with inlet and outlet Horns – 14 inches
Length – 28 inches
Width – 3 inches
Width with inlet and outlet Horns – 14 inches
DIY intercooler page, just check out the entire page its real long, but there ar epics on 3 and 4:
http://www.modularpowerhouse.com/for...cooler+project
Thread
Thread Starter
Forum
Replies
Last Post
