question on front springs
#13
RE: question on front springs
After the spring install (roush in back, fox 4cyl in front):
[IMG]local://upfiles/4605/6206864548EB4100ABCE5152BC4BB1AD.jpg[/IMG]
[IMG]local://upfiles/4605/CCD8A06A12D64BD69E6674F6171ACB2F.jpg[/IMG]
Before the spring install:
[IMG]local://upfiles/4605/33FCD44E46614490B100F49F4FEAC4A7.jpg[/IMG]
[IMG]local://upfiles/4605/6206864548EB4100ABCE5152BC4BB1AD.jpg[/IMG]
[IMG]local://upfiles/4605/CCD8A06A12D64BD69E6674F6171ACB2F.jpg[/IMG]
Before the spring install:
[IMG]local://upfiles/4605/33FCD44E46614490B100F49F4FEAC4A7.jpg[/IMG]
#14
RE: question on front springs
ORIGINAL: 2000GT4.6
After the spring install (roush in back, fox 4cyl in front):
[IMG]local://upfiles/4605/6206864548EB4100ABCE5152BC4BB1AD.jpg[/IMG]
[IMG]local://upfiles/4605/CCD8A06A12D64BD69E6674F6171ACB2F.jpg[/IMG]
Before the spring install:
[IMG]local://upfiles/4605/33FCD44E46614490B100F49F4FEAC4A7.jpg[/IMG]
After the spring install (roush in back, fox 4cyl in front):
[IMG]local://upfiles/4605/6206864548EB4100ABCE5152BC4BB1AD.jpg[/IMG]
[IMG]local://upfiles/4605/CCD8A06A12D64BD69E6674F6171ACB2F.jpg[/IMG]
Before the spring install:
[IMG]local://upfiles/4605/33FCD44E46614490B100F49F4FEAC4A7.jpg[/IMG]
#15
RE: question on front springs
I was surprised that you could both drop the car and get good weight transfer. I think you just have to stay around the 1 inch range, otherwise you start hurting performance.
#16
RE: question on front springs
ORIGINAL: skinnidaniel
i dont know about being dangerous but i do know if you cut a spring chances are they will continue to fall untill the body hits the tires. If you do decide to cut the springs cut the stock ones and keep the new ones for spares just incase... and ofcourse be ready to do the job twice. also i cant remember if it is KYB or who but someone does make a strut for the front that offers a 1" drop.
i dont know about being dangerous but i do know if you cut a spring chances are they will continue to fall untill the body hits the tires. If you do decide to cut the springs cut the stock ones and keep the new ones for spares just incase... and ofcourse be ready to do the job twice. also i cant remember if it is KYB or who but someone does make a strut for the front that offers a 1" drop.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM