4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

What to do??

Thread Tools
 
Search this Thread
 
Old 04-28-2007, 12:41 PM
  #1  
mpeav3
1st Gear Member
Thread Starter
 
mpeav3's Avatar
 
Join Date: Apr 2007
Location: IL
Posts: 59
Default What to do??

I have a 2000gt with a venom v400 chip module, SLP loudmouth exhaust, pulley kit, cold air intake, and 4.10sand inow have astage II Intercooled Procharger on the way. I was wondering what I should do next? I have about 1k to spend. Any suggestions??
mpeav3 is offline  
Old 04-28-2007, 12:59 PM
  #2  
jpmustanggt
5th Gear Member
 
jpmustanggt's Avatar
 
Join Date: Apr 2005
Location:
Posts: 2,613
Default RE: What to do??

Suspension! With that procharger you're gonna be spinnin through 3rd gear if you don't get it hooked down to the street.
Drag radials and Upper and Lower control arms should do the trick!
jpmustanggt is offline  
Old 04-28-2007, 01:02 PM
  #3  
mpeav3
1st Gear Member
Thread Starter
 
mpeav3's Avatar
 
Join Date: Apr 2007
Location: IL
Posts: 59
Default RE: What to do??

What are a good brand of drag radials to run? I have looked at Hoosiers but the customer responses to them were not so good, so I am a little worried about spending 230 dollars a piece if they are no good.
mpeav3 is offline  
Old 04-28-2007, 01:26 PM
  #4  
mpeav3
1st Gear Member
Thread Starter
 
mpeav3's Avatar
 
Join Date: Apr 2007
Location: IL
Posts: 59
Default RE: What to do??

bump.... Any other performance mods??
mpeav3 is offline  




All times are GMT -5. The time now is 07:39 AM.