Any 4.6 guys who can help me?
#11
RE: Any 4.6 guys who can help me?
3 bolt cc plates, cold air intake, trick flow plenum, throttle body, underdrive pullys, welded in mufflers (looks like magnapacks or flows), offroad midpipe with cutouts, adjustable lower control arms (couldnt see the uppers), spin the rear wheels to see if it has been regeared (3 3/4 turns on the drive shaft for one turn of the wheels = 3.73 gears), subframes, everything else looks stock.
#12
RE: Any 4.6 guys who can help me?
Can anyone post a pic of a chipped computer. I bought a used 03 gt and have found that it has some mods, and I am just trying to figure out what all. Plus it will help this guy know what to look for.
#13
RE: Any 4.6 guys who can help me?
i would get someone close to look at it and then ebay it, like cahtr6 said it wont help the price too much, maybe a little but def not the amount that was invested. Ebay is good to evaluate the markets equilibrium price, or the max they will spend on it. so good luck i wish i could help you.
#14
RE: Any 4.6 guys who can help me?
ORIGINAL: oxfordgt
3 bolt cc plates, cold air intake, trick flow plenum, throttle body, underdrive pullys, welded in mufflers (looks like magnapacks or flows), offroad midpipe with cutouts, adjustable lower control arms (couldnt see the uppers), spin the rear wheels to see if it has been regeared (3 3/4 turns on the drive shaft for one turn of the wheels = 3.73 gears), subframes, everything else looks stock.
3 bolt cc plates, cold air intake, trick flow plenum, throttle body, underdrive pullys, welded in mufflers (looks like magnapacks or flows), offroad midpipe with cutouts, adjustable lower control arms (couldnt see the uppers), spin the rear wheels to see if it has been regeared (3 3/4 turns on the drive shaft for one turn of the wheels = 3.73 gears), subframes, everything else looks stock.
#15
RE: Any 4.6 guys who can help me?
Sounds like I shouldhook up with xxkazp3rxx or Othicto see what my son has here.
I know he iswaaaay upside down in the car. At this point I suggest he cuts his losses and get away from the payments and insurance since he can't drive the car regardless of what he sells it for.
I prefer not to sell it on Ebay. I have been burned on two cars there and I hate to sell something that expensive to someone when they can't actually drive the car first.
I think Kelly Blue Book is around $7000. From what you guys are saying that is about all it probably is worth.
Bill
I know he iswaaaay upside down in the car. At this point I suggest he cuts his losses and get away from the payments and insurance since he can't drive the car regardless of what he sells it for.
I prefer not to sell it on Ebay. I have been burned on two cars there and I hate to sell something that expensive to someone when they can't actually drive the car first.
I think Kelly Blue Book is around $7000. From what you guys are saying that is about all it probably is worth.
Bill
#16
RE: Any 4.6 guys who can help me?
Unfortunatly mods, espcially the ones on the car, don't really add much value, if any.
I would try to sell it privatly. I would ask for more like 10K though, and see what happens. KBB is kinda notorius for undervaluing our cars, mine booked at 9500 when the bank said it was worth 12K...
I would try to sell it privatly. I would ask for more like 10K though, and see what happens. KBB is kinda notorius for undervaluing our cars, mine booked at 9500 when the bank said it was worth 12K...
#19
RE: Any 4.6 guys who can help me?
ORIGINAL: oxfordgt
3 bolt cc plates, cold air intake, trick flow plenum, throttle body, underdrive pullys, welded in mufflers (looks like magnapacks or flows), offroad midpipe with cutouts, adjustable lower control arms (couldnt see the uppers), spin the rear wheels to see if it has been regeared (3 3/4 turns on the drive shaft for one turn of the wheels = 3.73 gears), subframes, everything else looks stock.
3 bolt cc plates, cold air intake, trick flow plenum, throttle body, underdrive pullys, welded in mufflers (looks like magnapacks or flows), offroad midpipe with cutouts, adjustable lower control arms (couldnt see the uppers), spin the rear wheels to see if it has been regeared (3 3/4 turns on the drive shaft for one turn of the wheels = 3.73 gears), subframes, everything else looks stock.
it looked like packs as the mufflers...they werent but it looked kinda like them...some other brand though
#20
RE: Any 4.6 guys who can help me?
Here are some more pics of the car. Not perfect, but pretty clean for a 2000. Thanks!
http://s97.photobucket.com/albums/l2...y2546/Mustang/
http://s97.photobucket.com/albums/l2...y2546/Mustang/