DILO2001GT

i ran a 14.3 stock

what would these mods take off the 1/4 or what could i expect?

SLP Loudmouth cat-back
off road x-pipe
4.10 gears
Nitto Drag radials 315/35/17
Tunable Induction CAI

SilverGTV8

well a good launch and you will probably see 13.7 or so.

mdvaldosta

sounds right

jdaniel

Well those are the big mods I have besides timing adjuster and underdrive pullies and I ran a 13.3! That was before the objects highlighted in the list.

Mac ceramic long tube headers
Bassani MBX off road X pipe
Magnaflows
Densecharger Cold Air Intake
ProM 85mm MAM
Steeda underdrive pullies
Steeda timing adjuster
Pro 5.0 Short throw
H&R Progressive rate 1.5" drop
FMS 4.10's
Mach1 Grill delete kit
Blue Oval upper and lower control arms
JMS chip
Nitto 555R Drag Radials
276rwhp 325rwtq

DeViouS

13.3 that an awsome time. w/ ur 4:10 gears what is your top speed?

silver04stang

jdaniel what is your fastest time with all of those mods??

Acer2428

Mac ceramic long tube headers - $300
Bassani MBX off road X pipe - $300
Magnaflows - $350
(Plus $300 install)
Densecharger Cold Air Intake - $320 (w/ proM)
ProM 85mm MAM - FREE..haha, ok, not really...
Steeda underdrive pullies $160
Steeda timing adjuster $150
Pro 5.0 Short throw $180
H&R Progressive rate 1.5" drop $200
FMS 4.10's $75 (plus $300 install)
Mach1 Grill delete kit $50
Blue Oval upper and lower control arms ($150)
JMS chip $200 (w/ tune)
Nitto 555R Drag Radials $250
276rwhp 325rwtq

ALmost $3,300 w/out install on all the other stuff....

Just thought I'd see what you had spent (hope you don't mind).. COulda had a blower!