Full bolton owners with dyno numbers
#1
Full bolton owners with dyno numbers
I was wondering if a few peeps with full boltons or near it could post dyno numbers and perhaps a phone number to the shop they use (the dyno shop). I am really trying to find out if im getting hosed here but I dont have a lot of info.
#2
RE: Full bolton owners with dyno numbers
Well I had mine dyno'd at DC Motor Sports a while back but Im not gonna use those guys ever again. They dicked me on my gear and CA install after I drove an hour away to get it done. They are mainly Fbody specalists anyhow. [:'(]
#3
RE: Full bolton owners with dyno numbers
contact MPH, Im not sure of you question whether you want to know what can be made with bolt-ons or if your wanting pricing info or what. Im sure they can help.
Tim - timbarth@modularpowerhouse.com
Andy - andybarth@modularpowerhouse.com
Phone Number - (770) 751-0333
Tim - timbarth@modularpowerhouse.com
Andy - andybarth@modularpowerhouse.com
Phone Number - (770) 751-0333
#5
RE: Full bolton owners with dyno numbers
A buddie of mine got his done at CCS Tuning. He has an '02 GT with x-pipe and flows, Accufab 75mm TB and plenum, 85mm MAF Mac Straight Shot. His dyno #'s on a "mustang dyno" (mustang dynos read approximately 20% less than a dynojet). His numbers were 231 rwhp and 279 rwtq.
#7
RE: Full bolton owners with dyno numbers
2003 gt, 3.73s, upper/lower ca's, full length densecharger with bigger mas air, accufab 75mm tb and upper intake, ud pullies, custom chip, mac off road H, 2 chamber flows, and afm stage 2 cams, 276rwhp and 310ftlbs. I had all the bold ons as you can see except headers. I got it done at MPE performance, I'm in MA by the way. dyno tuneing cost 100 per hour and only took them about an hour.
I know your gonna say my numbers look low considering I had cams. but what you dont see is that in a few different places I picked up as much as 50 hp
I know your gonna say my numbers look low considering I had cams. but what you dont see is that in a few different places I picked up as much as 50 hp
#8
RE: Full bolton owners with dyno numbers
I paid $50 for three pulls, no tuning or anything though. If you're near NC I'll let you know where this guys at. Awesome shop.
I think a full bolt on GT dynos roughly 275rwhp.
I think a full bolt on GT dynos roughly 275rwhp.