ramprat

alright so i helped my dad install his BBK underdrive pulleys on his 98 GT. the reason he got them was the stock balancer had the rubber cracking and falling out. so we were installing them and we got into an argument on what to do with the stock balancer since you have to piggyback it to the BBK crank pulley. i told him you have to leave it all together, he said no. so he pressed the inner part out and buzzed off all the excess rubber and mounted it up. the car seems fine but isn't this wrong?

oxfordgt

Thats wrong. Go buy a new balancer and put it on. It has to be all togather.

ramprat

haha i told him that.. god - old people.. i guess they never learn

99GTvert

does that mean you just screw/bolt them together? I have March pulleys that I'm gonna try to do again, last attempt failed due to the crank pulley not coming off (need a breaker bar).

DTK

Yes, if they are piggybacks.

oxfordgt

Do you have the march pulleys with the crank dampner? If so you dont need to put the stock dampner on it. It looks like this if its the dampner.

99GTvert

Would that be a 4th piece? I don't believe I have that...I'm going to look for it...