4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

a few things taht i was wondering about

Thread Tools
 
Search this Thread
 
Old 07-25-2007, 08:43 AM
  #1  
importkiller89
1st Gear Member
Thread Starter
 
importkiller89's Avatar
 
Join Date: Jul 2007
Location:
Posts: 119
Default a few things taht i was wondering about

on the 98 cobra when it has been sitting for like 20 minutes or longer it cranks over for like 10 to 15 times b4 it starts but if u stop in the middle of the cranking then crank again it still takes that long to start butit back fires as soon as it starts up so i know there is fuel there n i just changed the plugsim just wondering if ne one else has had this problem im thinking wire or coils i would also like to know if ne one knows how much u can bore the 4.6 motor out to i was looking to bore it out to close to like a 289 orbigger i want to know how far i can go
importkiller89 is offline  
Old 07-25-2007, 08:51 AM
  #2  
Adam03GT
5th Gear Member
 
Adam03GT's Avatar
 
Join Date: Aug 2006
Location:
Posts: 4,081
Default RE: a few things taht i was wondering about

As far as the starting issue.... Its a mustang thing . Every mustang i have ever climbed into has done it.
Adam03GT is offline  
Old 07-25-2007, 08:53 AM
  #3  
Pauly_B
2nd Gear Member
 
Pauly_B's Avatar
 
Join Date: Apr 2007
Location:
Posts: 385
Default RE: a few things taht i was wondering about

Mass Air
Pauly_B is offline  
Old 07-25-2007, 10:33 AM
  #4  
Rusmisel01GT
5th Gear Member
 
Rusmisel01GT's Avatar
 
Join Date: May 2006
Location:
Posts: 2,111
Default RE: a few things taht i was wondering about

Well, My mustang never cranks longer then 1 second... so im not sure about your problem, but on boreing to a 289... Im not very knowledgable when it comes to machinging and boring... But I know that If your motor is gonna be tore apart in the first place... they make a stroker kit that turns your 4.6 to a 5.0

If anyone can comment on how the stroker kit works... I would like to know please...
Rusmisel01GT is offline  
Old 07-25-2007, 08:30 PM
  #5  
importkiller89
1st Gear Member
Thread Starter
 
importkiller89's Avatar
 
Join Date: Jul 2007
Location:
Posts: 119
Default RE: a few things taht i was wondering about

but if i stroke it then im gonna have to get the machened i figured that it might be easer and cheeper to bore it cause im not gonna do internal work my self ne way
importkiller89 is offline  
Old 07-25-2007, 08:36 PM
  #6  
importkiller89
1st Gear Member
Thread Starter
 
importkiller89's Avatar
 
Join Date: Jul 2007
Location:
Posts: 119
Default RE: a few things taht i was wondering about

i just needed to know how far i can strok it to
importkiller89 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mapitts
5.0L GT S550 Tech
49
05-15-2016 02:57 AM
Mikett
V6 (1994-2004) Mustangs
2
09-12-2015 10:52 PM
algregory
4.6L V8 Technical Discussions
4
09-11-2015 11:44 AM
v8sn95
4.6L (1996-2004 Modular) Mustang
2
09-07-2015 10:17 AM
Emblazoned
General Tech
0
09-03-2015 10:45 PM



Quick Reply: a few things taht i was wondering about



All times are GMT -5. The time now is 06:40 PM.