cixx01gt

Im currently removing the stock air filter, and installing my rai, i'm new to mustangs, so im having some trouble, this is my question. THis right here, do i REMOVE it and put it on my new JLT RAI, or what do it do....

cixx01gt

bump because my ****s outside on the ground!

amoosenamedhank

Yes that is your MAF sensor. You need to put that with the new intake.

GT03 TJS

yessir....thats your mass air flow meter.....i highly doubt your car will even run without it....if it does, itll be rough as all hell..... when you disconnect everything, be gentle, cuz the MAF can get messed up pretty quick. Also, be sure to keep that little round screen in front of it (supposedly helps keep out debris....who knows if it really works, but cant be too safe...)

SlvrOhTwoGeeTee

Yeah you need to keep that bad boy in there... MAF=car running

onegreedy

uum what is a rai, i know cai never heard of rai ! ! !

HamMach1

An RAI is a Ram Air Intake. The filter is in the engine bay rather than in the fenderwall. For example

CAI (Cold Air Intake):


RAI (Ram Air Intake):

jEEd

with the JLT RAI your going to connect that MAF adapter to the silicon hose to the big PVC pipe.. im sure your JLT RAI came with simple instructions.

HamMach1

It should look something like this, though this is a Mach is SHOULD be similar on a GT.



[IMG]local://upfiles/15784/A1313D229AB842C4AF97D235EF891698.jpg[/IMG]

jEEd

exactly how it shows there just the fatty pvc pipe is just bigger and you dont have that mach ram air coming from that heatshield

+1