Jexey

Can't figure out these vacuum lines. Finished my PI swap and she wont start. Figured i'd start with these and try to ignore the factthat my fuel pump isn't turning on. No lecturing me on labeling **** and taking pictures, I did but it was so long ago... well I forgot and the motor got rained on once and the ink ran off the labels.

Squishy bastard


Side of the throttle body, don't even have the line for it.



And this skinny *** red line.



Want to get her started today. And any insight on the fuel pump not working would be great. Could it be because of the vacuum lines? The fuse was recently replaced but got wet.

8banger

looks like one of thse lines go to your fuel pressure regulator...Which one not sure...but looking at your first pic...can see the fuel reg doesnt have a vaccum line on it...

8banger

Heres what I'm talking about....

Jexey

I'll go look at that, would explain why the fuel pump isn't turning on.

Jexey

nope, the fpr is hooked upnow - theskinny red line on the left hand side goes to that little valve

still wont start and the fuel pump still wont turn on

jst854

I can take some pics of my where all my lines go for you, would be untill tonight though(at work now)

Jexey

Well there's a lot of guru's on the site that should be able to tell me. Hopefully we wont have to go that way!

8banger

Did remember to plug in the Crankshaft snesor...?

Jexey

Yeah all my sensors are plugged in. I'm eating now but afterwards i'm going to go turn the key and hit the shrader valve on the fuel rails and see if I got fuel up there. If it's dead then i'm going to start looking at relay's and fuses.

Jexey

Turn the car over hit the valve and nothing comes out

no fuel

how do I check to see if it's the fuel pump relay, don't want to drop 15 on a relay if i dont have to