4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Eibach Pro Kit Help

Thread Tools
 
Search this Thread
 
Old 08-30-2007, 11:22 PM
  #1  
kameleon
Thread Starter
 
kameleon's Avatar
 
Join Date: Aug 2007
Location:
Posts: 35
Default Eibach Pro Kit Help

I just had my Stang painted and had a Cobra R front bumper installed. I get crap from everyone saying my Stang sits too high. So I need some advice. This cover is going to sit low to the ground making it hard for me to pull into steep inclines. Should I lower it for one and for two what springs should I get? I have a convertible so it is more of a pain to find springs for this car. I see some only drop the car about 1.5 inches and Eibach drops up to 2 inches. Does anyone have a hookup or know of a place to get them the cheapest? Hopefully I get some good advice so I can make the right choice. Thanks guys!
kameleon is offline  
Old 08-31-2007, 09:09 AM
  #2  
BraMas
5th Gear Member
 
BraMas's Avatar
 
Join Date: Jun 2005
Location: Holland, MI
Posts: 4,634
Default RE: Eibach Pro Kit Help

The FRPP C springs might be your best bet. FRPP C
Supposed to lower .875 Front .5 in the rear
BraMas is offline  
Old 08-31-2007, 10:01 AM
  #3  
wgdt21
5th Gear Member
 
wgdt21's Avatar
 
Join Date: Apr 2005
Location:
Posts: 2,126
Default RE: Eibach Pro Kit Help

airbags. raise that baby for steep inclines, and slam it once you get to the top.
wgdt21 is offline  
Old 09-01-2007, 09:11 AM
  #4  
kameleon
Thread Starter
 
kameleon's Avatar
 
Join Date: Aug 2007
Location:
Posts: 35
Default RE: Eibach Pro Kit Help

Air bags would be sweet but I always wondered if they would hold good when flying through curves. Plus they are expensive. I think the last set I seen online was $1400.
kameleon is offline  
Old 09-01-2007, 10:15 AM
  #5  
undecided.steve
4th Gear Member
 
undecided.steve's Avatar
 
Join Date: Sep 2006
Location:
Posts: 1,031
Default RE: Eibach Pro Kit Help

ORIGINAL: kameleon

I just had my Stang painted and had a Cobra R front bumper installed. I get crap from everyone saying my Stang sits too high. So I need some advice. This cover is going to sit low to the ground making it hard for me to pull into steep inclines. Should I lower it for one and for two what springs should I get? I have a convertible so it is more of a pain to find springs for this car. I see some only drop the car about 1.5 inches and Eibach drops up to 2 inches. Does anyone have a hookup or know of a place to get them the cheapest? Hopefully I get some good advice so I can make the right choice. Thanks guys!
Since you have a vert I believe the Ford G springs are the ones you want as they have the proper spring rate for verts.
Whatever you do, make certain you buy springs for a VERT and not a coupe. Eibach and HR along with Ford of course sell springs specifically made for the verts.


undecided.steve is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
baddog671
Archive - Parts For Sale
20
07-26-2016 01:20 PM
mapitts
5.0L GT S550 Tech
8
05-11-2016 10:14 AM
jerrytubes
2005-2014 Mustangs
2
10-23-2015 12:11 PM



Quick Reply: Eibach Pro Kit Help



All times are GMT -5. The time now is 10:34 AM.