351w into my 96gt
i want to know if anybody has done this swap and what it entails to get it to go in my 96. i would like to have it done before mustang week this year. thanks for the help
|
RE: 351w into my 96gt
basically you'd be redoing the whole car. lots of work but very doable. pushrod motors do get swapped into 96+ cars.
|
RE: 351w into my 96gt
Actually it's not as bad as you might think. Remember the '94-'95 GT came with a 5.0, which has very similar external dimensions as a 351W. You can get motor mounts for a 5.0 SN95 Mustang and they should work. The extent of your work will depend on whether or not you want a fuel-injected or carb'd engine, whether you're going to use a 351 roller block or not, etc. It would be a lot cheaper to build a carb'd 351 but I can only recommend that if you don't have to smog. A fuel-injected 351 would be harder but you can probably get a wiring harness and computer from Ford like the one they used in the 1997 Saleen S351 Speedster or maybe an aftermarket setup. You'll need a beefier tranny if you want a 5-speed or 6-speed, or you can just get a built auto. I've thought about doing the same thing, but it's a PITA to find a 351 roller block...:eek:
|
RE: 351w into my 96gt
so id be better off putting a 5.0 motor from a SN95 stang
|
RE: 351w into my 96gt
just buy a nice crate motor, like a 331 or a 347 stroker. but a 302 block based engine would probably be the easiest.
|
RE: 351w into my 96gt
I built a 460 bb for my 98 here's a pic. I used 460 motor mounts. email me if you need help
ORIGINAL: purple96gt i want to know if anybody has done this swap and what it entails to get it to go in my 96. i would like to have it done before mustang week this year. thanks for the help [IMG]local://upfiles/6214/A66C39847B0B4E64AE41B0BD42B84F6F.jpg[/IMG] |
RE: 351w into my 96gt
good god thats what i want to do, thats some chevy ass kickin power right there
|
RE: 351w into my 96gt
ORIGINAL: chriscindy6369 I built a 460 bb for my 98 here's a pic. I used 460 motor mounts. email me if you need help ORIGINAL: purple96gt i want to know if anybody has done this swap and what it entails to get it to go in my 96. i would like to have it done before mustang week this year. thanks for the help [IMG]local://upfiles/6214/A66C39847B0B4E64AE41B0BD42B84F6F.jpg[/IMG] |
RE: 351w into my 96gt
really not too much work to make it fit. I had to go with a Auto but i run a 4500 stall with it. Buy a motor mount kit for under $75.00
|
All times are GMT -5. The time now is 05:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands