PI Heads and intake 96-98 guys
 

Hey guys Im new to this posting threads thing and have a 97 GT pretty much stock, got underdrive pulleys, CAI, O-R H pipe, and flows ............just wondering where you got the PI heads and intake and the price you paid for them to be bought and installed....any help would be great. thanks guys.

RE: PI Heads and intake 96-98 guys
 

I got mine off e-bay for 600 bucks.....heads, intake-tb/plenum and fuel rail. I think they cost lost to install....1000 bucks for labor and parts.[:-] Do it yourself and save a butt-load.

RE: PI Heads and intake 96-98 guys
 

how hard was the install.....my uncle is a mechanic so it wouldnt be too much for him to install.

RE: PI Heads and intake 96-98 guys
 

by the way great car devin, sounds great and very nice burnout.

RE: PI Heads and intake 96-98 guys
 

Got my heads and intake for $265 plus shipping off eBay. That is where you will find the best deal. I agree you should definitely do it yourself if you have the time and even a small amount of mechanical ability because it really isn't hard. I'm going to do mine myself as soon as I get the gaskets and other misc parts I'll need. Read this article for a complete explanation of the whole process: CLICK HERE Just keep an eye on eBay for a good deal. A new swap kit will cost you upwards of $1,300.

RE: PI Heads and intake 96-98 guys
 

so basically if I did it myself 2000 for all parts, and if i had in installed it would cost be nearly 3 grand right....thanks for the help guys....glad theres people like you out there that are willing to help a man out.

RE: PI Heads and intake 96-98 guys
 

Thanks! I agree with USA....it's good learning experience and you get to say you did it yourself.:D

RE: PI Heads and intake 96-98 guys
 

i paid 400 for my heads cams and intake locally, from the owner of the car they came from.

my setup is complicated, but it cost me aroun 4 grand total, parts and labor.

RE: PI Heads and intake 96-98 guys
 

^^^.. Wow someone goet screwed

RE: PI Heads and intake 96-98 guys
 

cams, valves, springs, porting can get expensive my man.