Will the U/D pulleys from a 98GT fit a 99GT?
10-16-2007, 03:27 PM
#5
2nd Gear Member
Join Date: Jan 2007
Location:
Posts: 353
RE: Will the U/D pulleys from a 98GT fit a 99GT?
Here is something I pulled of the Steeda website:
Midway through the production run for the 2001 model year Ford changed the design of the water pump on the 4.6L engine. The older style pump produced from 1996 to mid 2001 had a longer shaft. In January of 2001 the design of the pump was changed to a shorter shaft. This necessitated a change in the design of the pump pulley. Click HERE for our guide.
Midway through the production run for the 2001 model year Ford changed the design of the water pump on the 4.6L engine. The older style pump produced from 1996 to mid 2001 had a longer shaft. In January of 2001 the design of the pump was changed to a shorter shaft. This necessitated a change in the design of the pump pulley. Click HERE for our guide.
10-17-2007, 09:03 PM
#7
6th Gear Member
Join Date: Jan 2004
Location: United States
Posts: 12,575
RE: Will the U/D pulleys from a 98GT fit a 99GT?
I have stock NPI pulleys on my car. the only difference between 96-01 1/2 should be the water pump, the NPI car stock water pump pulleys have a lip on the front, the 99-04 don't.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM
