deja_voo182

Ok so i finished up my install of new white faced gauge covers. I followed the instructions from american muscle as close as possible. the gauges work great but now the low and high beam headlights will not come on. I know its not the bulbs because i have the flash to passhigh beams. I spliced the positive wire from the gauges into the gray wire in the middle of the headlight switch. Anyone know what the problem could be? thanks

deja_voo182

Just checked the fuses they are fine

deja_voo182

bump i know someone has these

deja_voo182

anyone out there

GolfmanSpeck

either you cut the high beam wire or your sliced the wrong one. Check your wiring and try again!

deja_voo182

does anyone know what wire to splice into?

03mustgt

There was an empty terminal on my headlight switch, I just put a connector on that and did not have to splice into anything.