What am I looking at...
11-26-2007, 09:23 AM
#2
Super Moderator
Join Date: Jul 2003
Location:
Posts: 14,917
RE: What am I looking at...
If you already have the parts, expect about 800 in labor + 90 for an alignment.
If you don't have the headers, mid-pipe and catback, depending on the brands you use, you could spend anywhere from 700 total to 1500 total on that alone.
If you don't have the headers, mid-pipe and catback, depending on the brands you use, you could spend anywhere from 700 total to 1500 total on that alone.
11-26-2007, 09:25 AM
#3
2nd Gear Member
Join Date: May 2006
Location: Raleigh, NC
Posts: 440
RE: What am I looking at...
depends on whether or not you get a catted midpipe, and how much of the work you are going to do yourself. getting headers installed on your car cost an a$$load from a shop.
11-26-2007, 03:32 PM
#7
6th Gear Member
Join Date: May 2006
Location: Ohio
Posts: 6,448
RE: What am I looking at...
If you pay a shop to do the work you will pay more in labor then you did for the parts. Or you can spend under $100 for the tools you need, grab a buddy and a case of beer and knock it out in a day.
labor cost
springs- $250
LT headers w/midpipe- $800
catback- $150
Thats what I would charge you
labor cost
springs- $250
LT headers w/midpipe- $800
catback- $150
Thats what I would charge you
11-27-2007, 01:28 AM
#9
2nd Gear Member
Join Date: Sep 2007
Location:
Posts: 208
RE: What am I looking at...
ORIGINAL: stevenr1227
I live in Tampa...Anyone know a place that's not going to rape me?
I live in Tampa...Anyone know a place that's not going to rape me?