Purge flow vale problem - MustangForums.com

4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Purge flow vale problem

Reply

 
 
 
Old 11-26-2007, 11:58 AM
  #1  
cdawson
Thread Starter
 
Join Date: Nov 2007
Posts: 3
Default Purge flow vale problem

I have a '96 Mustang that is getting a P1443 code. I have done a lot of the stuff on the forum to try and troubleshoot the problem. I narrowed the problem down to the Purge flow valve. I have replaced the valve twice with a brand new valve. It is getting around 12 - 13 volts to the electrical connection on the Purge Flow Valve, but the valve is not opening. I checked the vacuum on the inlet side and there is a very strong vacuum there, but no vacuum on the outlet even though voltage is going to the valve. Is there anything else that could be causing this problem? Thank you,

Craig
cdawson is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
9550
5.0L (1979-1995) Mustang
10
10-26-2015 06:01 PM
Luke9222
4.6L General Discussion
19
10-23-2015 12:55 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 08:59 AM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 06:20 PM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory