momob009

are the hp gains for cams worth the labor you would pay to have them installed i have a 02 gt automatic with 70mm tb/plenum fender well cia with k&n filter flowmaster super 40 mufflers im going to add off road h-pipe 3.90 gears and a dyno tune i dont know much about cams which would be better stage 1 or 2,s and whats a averege hp gain im just looking for something faster then some stock gt,s where i live thanks for any feed back

GrayGhost01GT

bump i need some help with this issue as well stuck between stage 1 or stage 2

timeformiller44

get heads with those cams and ull see good gains...i mean u will with cams...but better with heads bc thats the downfall to the 2v is the poor flowing heads

oxfordgt

Is the gains worth the $1400 install + $600 cams, no. But if you buy a simple tool box and do it yourself using the numerous writeups on the internet then yes.

momob009

what are the averege hp gain for cams iwatch horse power tv today they installed a set of crane cams in a 02 automatic gt stock other then x-pipe and 4.10 gears and it only pick up 11 hp

Nitti00GT

Damn that's pretty weak. Then again the car was stock and crane isn't the best cam on the market for our cars (so I've been told). +1 on doing the install yourself. I was quoted 450 and 600 for install on cams last fall btw.

GrayGhost01GT

only 11HP DANG That Sucks!!!!!

POISND U

That's a pretty mild cam. You'd have to go to at least a stage 2 to even make it close to "worth it".

Nitti00GT

I'm getting Comp cams installed with a .550 lift on intake and exhaust with a 246 duration @ .050... I'd say that's pretty good for a stage 1 seeing that VT is out of buisness.

GT03 TJS

yeah thats the thing....i was talking with a friend of mine about his 99GT....he said he wants cams like mine, but tough part is...VT is out of buisiness....so i didnt know what to tell him was comparable. From what I've read MMR stage II cams need notched pistons....comp stage II need notched pistons....

i love em...but whats so special about the way VT ground their cams?! can someone helpme give him a good cam similar to a VT stage II....he was looking at a comp XE 270 i think....anyone have that?