pi swap and cams
12-05-2007, 10:16 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location: Ohio
Posts: 403
RE: pi swap and cams
well i ordered all the parts so when i get more money they should be in and yielding some nice power and i got them for 1075 not 1150
12-06-2007, 12:39 AM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location: Ohio
Posts: 403
RE: pi swap and cams
what else doi need for the swap besides the manifold.
12-06-2007, 08:21 AM
5th Gear Member
Join Date: Nov 2005
Location: MN
Posts: 4,412
RE: pi swap and cams
Make sure these guys check you vtp clearance. Otherwise you could of problems. Or you may get lucky.
12-06-2007, 10:50 AM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location: Ohio
Posts: 403
RE: pi swap and cams
Quote:
ORIGINAL: amoosenamedhank
Make sure these guys check you vtp clearance. Otherwise you could of problems. Or you may get lucky.
what is vtp
12-09-2007, 07:31 PM
2nd Gear Member
Thread Starter
Join Date: Feb 2007
Location: Ohio
Posts: 403
RE: pi swap and cams
ok ive heard ptv before but its all the same
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GimpyHSHS
4.6L (1996-2004 Modular) Mustang
19
12-19-2023 01:12 PM
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
patchshaffer
Tuner Central
3
10-05-2015 02:24 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
add ,
cams ,
carb ,
certification ,
dyno ,
hp ,
issues ,
mustang ,
ohio ,
pi ,
shop ,
supercharger ,
swap ,
vtp ,
xe274h ,
xe274h14