Y2KY

Ok so the routing sticker for drive belt is not present.. And Haynes manual is wrong! Anyone have a picture of how it is supposed to be routed on the 4.6? Mine is a 2000 GT and this is really making me wonder WTF.

Please help!

LynnBob Mustang

Whats wrong with the Haynes manual? They're usually pretty good.

Lynn

Y2KY

Unless I am missing something the routing is being shown wrong in the manual... Missing a pulley it appears in the book.

Y2KY

Think I found it

http://www.gates.com/common/part_loc...m.cfm?id=S8016

adam_ferguson

hey a really good trick is , smooth with smooth , ribbed with ribbed. put the smooth end of the belt on the smooth pullies. put the ribbed side on the ribbed pullies. if you can work it like that it will always be correct

Y2KY

That link I posted was correct. Not sure why haynes shows it alittle diffrent. But all is good and went with the goodyear gatorback from autozone for $27 bucks.

nathansee3

You should always before takin the belt off make yourself a little diagram so that this doesnt happen. . .