jtfrog

In a jam, I'm replacing the belt and I don't have a diagram. The diagram in my Haynes manual does not match. every picture Ive seen does not match. I have an extra pulley

WhiteFoxGT

lol, you have an extra pulley? I dont think so..

Whamo

is the routing different for a 98gt... mine does not rout like that. the tensioner is different too.. granted i have a s/c between 8 and 1. but that is not right for my 98gt... check ur info? or am i wrong.. i dunno.
try this

jtfrog

I figured it out. Mine looks like the one in the top picture the one with the more detailed drawing. My Haynes manual showed the lower drawing.

Thanks

WhiteFoxGT

Whamo, The belt is a little different on non-pi GTs, but I saw the pick in his sig and posted the picture for his car....not every 4.6

MustangMan00

heres another hint...draw it out before you take it off....

racer02GTstang

non-pi cars have a different timing cover and tensioner than a pi car.. actually the 99 gt's had the same timing cover as the non pi's i believe as well.. i think the change was made in 2000.

jtfrog

What does PI stand for ?

WhiteFoxGT

Performance Improved... Its how Ford got 260 SAE outta the 4.6 for the New Edges. Different head and intake design.

NPI is Non-Performance Improved...96-98 GTs