Mach Stereo Flat
#2
RE: Mach Stereo Flat
Press in and hold the volume control for 5 seconds (with the radio on) until the display shows SPEED VOL and a number (0 to 7). This is the speed sensitive volume setting, it's probaby set to 0--set it to 5, 6, or 7 and go for a ride...[/align][/align]
#3
RE: Mach Stereo Flat
what is the speed control supposed to do anyways? i just did it on my mustang. i adjusted it and didnt seem to change anything at all. Then i tried it in my wifes 2003 escape with the mach stereo and it didnt even display speed control after doing it the same way as my mustang. Now, im really curious of what it is and what it does. Thanks
[align=left] [/align]
[align=left] [/align]
#4
RE: Mach Stereo Flat
As the name implies, it causes the sound system volume to increase as the vehicle speed increases--set to "0" is does nothing, set to "7" the effect is most pronounced. I usually set it to 7 and find that it works quite well, with the most noticable change happening around 40 to 45 MPH.[/align][/align]From the '03 GT Owners Manual[/align][/align][/align][/align]Sound's like your wife's Escape does no have this capability--what does her owners manual says about it?[/align][/align][/align]
#10
RE: Mach Stereo Flat
ORIGINAL: MustangMan00
ya what yrs is this on??? 2000?
ya what yrs is this on??? 2000?