2002silvergt

hows it going?....ive got a vortech v1 supercharger and was wondering how i "clock" it to run an intercooler...ive heard of it but am not sure what to take apart and if i will need new gaskets or anything....this may get moved but i dont like posting the pipes,boost,juice section because replies do not get answered very soon...thanks

Fobra

you just remove thos bolts on the mounting plate and turn the unit i believe

2002silvergt

alright....another question then...if i just rotate the entire unit after i unbolt it from the mounting bracket...wont the oil feed and drain lines be on the top??

Fobra

the should just be parellel

2002silvergt

alright...i dont see anyway that the unit can turn on the bracket...it can only go on 1 way...does the supercharger have a part that seperates and turns to shoot the air downward?...thanks,joey

amoosenamedhank

This a picture of a procharge, but it's the same thing. Do you see the hex head bolts that are 2 to a bracket that are by the s/c outlet? Go around the head unit a loosen all of those and it should rotate.

2002silvergt

is there any kind of silicone or gasket that i will have to change?...your saying i just loosen the bolts, turn the unit, and tighten the bolts back up...

racer02GTstang

you have to take them all out cuz your going to turn the whole thing around to where you want it. then you put them back in.

2002silvergt

thanks...i got it figured out now...i knew what to do but was concerned about any kind of seal/gasket that may be there..cant wait to see what this things gonna do..

amoosenamedhank

Awsome, hope it works out for ya. Are you doing a DIY intercooler or did you buy a paxton system or something like that?