zex help asap
 

Im sorry about all the questions but I called up the zextek hotline and I talked to someone and they said that for the dry kit hoses one of them could be tapped into the fuel pressure sensor on the fuel railand then the other hose could be connected to a hose on the plenum does anyone know this to be true... help asap so i could finish my install please

RE: zex help asap
 

can anyone help? please

RE: zex help asap
 

Are you asking if you have a sharder vavle to tap into. If so, they only came on mustangs from 99-2000 it think. Post some pics

RE: zex help asap
 

If you have a dry kit, why do you need a line for fuel? Or is it a fuel pressure safety switch? I may just be reading your post wrong...

RE: zex help asap
 

and why do you need 2?

I have an 01 with a shraeder valve and i know of an 02 with one, so they were on there for a while.

You dont need it with a dry kit, though. Unless you are doing a FPSS like sstang said.

RE: zex help asap
 

can you guys post pics of what you guys are talking about...im still new to the car and unsure what a Shraedar valve is...and the zex instructions say to connect one vaccum hose to an unused vaccum port on the intake manifold..and the other hose to a fuel pressure regulator...but seeing how i have a returnless fuel system...kinda cant do that. so i was wondering there is a vaccum hose that is on the fuel rail and i just tapped into that...so i was wondering if that would be ok....i can try to get pics up but im not sure if i will be able to get them on here...thanks for the help