pete97GT

my door lock actuators dont seem to have enoughpower to open or close the lock, i can seethe pinmove up a tiny bit, like its trying to push up the pin up but cant, i dont see how both of my door actuators went out at the same time so i really dont know what might be causing this. i know its not my remote b/c it pops the trunk fine. any ideas?? appreciate the help.

AmericanRicer87

sit in the car and lock the doors, do they move up and down freely?

BraMas

Do you have aftermarket ***** on the locks. My UPR's have a problem when I lock it becasue they are a little to big for the hole.

Whamo

make sure you have a good battery too, a bad battery wont supply the needed voltage.

MustangMan00

yup my pass. side doesnt work 99% of the time....if i unlock itll move a lil but not go up, if i keep pressin it the power gets weaker and weaker....some days it will work once but thats in a looong time...im too lazy to fix it i just open the door from the inside for passengers

pete97GT

come to think of it, my battery is pretty old, and i do get a fairly long start, but yes the ***** are stock oem and it doesnt matter whether or not i use the remote or the button on the door when i sit inside, doesnt work either way, thanks for the input tho