How hard is to replace...
03-16-2008, 04:07 PM
#1
Thread Starter
Join Date: Aug 2007
Posts: 7
How hard is to replace...
How hard is it to replace a bad O ring on a AC hose? On my 98GT it is between the engine and the fan, so visibility and reach is not a problem. Just never done AC work before and didn't know if I would need special tools and or technique.
Thanks!
Thanks!
03-16-2008, 04:55 PM
#2
4th Gear Member
Join Date: Jan 2005
Location: Port Monmouth, New Jersey
Posts: 1,984
RE: How hard is to replace...
its not difficult except for the fact that the ac is going to have to be discharged. After that, it has to be recharged but before recharging it should be vacuumed off all moisture
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
