3.55 or 3.73 gears?
#11
RE: 3.55 or 3.73 gears?
FRPP 3:73's are great. I love mine. First, 3:55 not worth it may as well be stock. second, 4:10 a little much for me I do a lot of highway driving. 3:73 perfect. I did run a 13.6 with them and still cruise around 2 grand in 5th on the HWY
#12
RE: 3.55 or 3.73 gears?
ORIGINAL: DuckyGt
Get the 3.73 or 3.90 for all that highway driving 93 octane is expensive right now and only getting higher.
Get the 3.73 or 3.90 for all that highway driving 93 octane is expensive right now and only getting higher.
unless your timing is advanced.
#15
RE: 3.55 or 3.73 gears?
ORIGINAL: Fallstar01
3.73s will pull roughly 14% harder than stock, 3.90s pull roughly 19% harder, 4.10s pull roughly 25% harder
3.73s will pull roughly 14% harder than stock, 3.90s pull roughly 19% harder, 4.10s pull roughly 25% harder
#16
RE: 3.55 or 3.73 gears?
ORIGINAL: DIVER8374
^^^^ If someone would put this on a sticky along with the info on what rpm's you are at at normal speeds (30,45,55,65,75) for both the 5 speed and a auto trans, that way when someone want to know what gear they should get we can direct them to all the info they need!!!
ORIGINAL: Fallstar01
3.73s will pull roughly 14% harder than stock, 3.90s pull roughly 19% harder, 4.10s pull roughly 25% harder
3.73s will pull roughly 14% harder than stock, 3.90s pull roughly 19% harder, 4.10s pull roughly 25% harder
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM