MustangForums.com - heads and Cam

MustangForums.com (https://mustangforums.com/forum/index.php)

- 4.6L (1996-2004 Modular) Mustang (https://mustangforums.com/forum/4-6l-1996-2004-modular-mustang-7/)

- - heads and Cam (https://mustangforums.com/forum/4-6l-1996-2004-modular-mustang/428126-heads-and-cam.html)

hey goys... new to the mustang world here, but I have a 1996 GT lowered on eibach springs, magnaflow glass packs (just ordered an offroad X-Pipe) and a trickflow upper intake plenum, short ram intake, and throttlebody (not sure what size). The next mod id like to do is heads and a cam. I was hoping you guys could point me in the right direction for assembled heads and what cams to buy that are fairly reasonable in price.I want a rough idle cam and I want to run pump gas. Not too sure if a supercharger will be installed, but maybe in the late future.Please leave some links and recomendations.thanks

RE: heads and Cam

Well if you get assembled heads they are going to already have the cams in them. If i were u i would just buy heads and the cams you want.

RE: heads and Cam

PI heads, PI intake manifold, and PI cams. It won't give you a lumpy idle like you want, but I gained 72 rwhp from a PI swap and tune.