taking dash apart - MustangForums.com


4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Reply
 
 
 
Thread Tools Search this Thread
Old 04-09-2008, 08:03 AM   #1  
01and96stanggt
2nd Gear Member
Thread Starter
 
Join Date: May 2006
Location:
Posts: 244
Default taking dash apart

would it be hard taking the dash apart, i need to change the bulb for the check engine light, where do i start at
01and96stanggt is offline   Reply With Quote
Old 04-09-2008, 12:04 PM   #2  
ponysnake99
4th Gear Member
 
ponysnake99's Avatar
 
Join Date: Oct 2006
Location: Durham, NC
Posts: 1,541
Default RE: taking dash apart

all you need to do is remove the instrument cluster, two 1/4 (7mm) bolts at the topand removal of the headlight **** (the hardest part) get the bezel off. There are four torx/5mm bolts holding thecluster in. Two electrical connections later you can access the bulb.
ponysnake99 is offline   Reply With Quote
Old 04-10-2008, 11:25 AM   #3  
Mitch02GT
 
Join Date: Jan 2008
Location:
Posts: 38
Default RE: taking dash apart

hey. i did this just last week. There are two bolds to pop out on the top of the bezel. Then remove your lightswitch with a flathead screwdriver. You just have to fiddle around, its just a retaining clip. Then pop the outer part off and you will see the cluster is held in with four bolts. Once these are released, pull the cluster out just a few inches to gain access to the two electrical wires in the back which are also held in with retaining clips. Please dont break them. Then your going to have to wedge the steering wheel down as far as it will go, (lowest possible position must be held because it wont click in) and then pull out the cluster. The rest is straight forward. Reverse it to put it back in.

Mitch
Mitch02GT is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Foose Design 2015 Package? 2016PP The New S550 2015-2019 Mustang 3 09-23-2015 09:51 AM
Under-dash Courtesy Lighting...HELP accarter General Tech 1 09-21-2015 11:56 PM
First Impression 2015Ecoboost New Member Area 3 09-17-2015 01:48 PM
whats needed to swap a 4.6L into ratrod rksnow1 Motor Swap Section 0 09-14-2015 08:46 PM
Annoying rattles in cabin - 2014 V6 tmdm 2005-2014 Mustangs 1 09-04-2015 06:45 PM


Tags
2002, dash, ford, gt, mustang, taking

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 09:46 AM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.