InferRedd

I know this has been brought up and replied my many but I thought I should ask it myself to get the answers to me.

Q: Is it positive that the 2001 PI intake and parts (not including heads) will fit with a 1996 Mustang GT? (Obviously non-PI)
Note: I have the problem with a cracked intake near the back, underneath the heaterhose, behind the throttle body and coolant is leaking.

I will appreciate your responses. Thank You.

96GT226410

Yes, very possible. Either use adapter plates, RTV method, or the search function. And by the way, SN-95 Mustangs are '94 - '04.

pcs

here is a how to https://mustangforums.com/m_3833004/tm.htm
arent sn95 all 94-04 mustangs? kind of like fox mustangs are 79-93. its justthe body.

Zanador

There are lots of ways to do this.


Plus a few write ups as well.


They sell adaptor plates that you run along with gaskets, which will work better than anything else. There have been people who seal it up with RTV silicone, but personally I would'nt do that... the 50 bucks for the adaptors IMO is worth the ease of mind knowing it is done right and I will not slam coolant into my engine bay and possibly into the engine itself.

RipTide7

I used the rtv solution. Couldnt find cheap adapter plates when i did it about a year and a half ago. great cheap mod if you dont have the money for a full swap yet. Took me 2 trys to get it right but it runs great now.

redstanger

rtv method to fill in the gaps on the stock PI gaskets.

1sloblckgt

Great how to on doing just the intake manifold...