Romeo max?
06-25-2008, 03:24 PM
#3
3rd Gear Member
Join Date: Mar 2007
Location: Where gunshots are more common than birds chirping
Posts: 504
RE: Romeo max?
ORIGINAL: redstanger
as much as you will ever through at it
.MMR actually takes out aluminum blocks and put in the cast iron romeo or windsor blocks for 900hp+
as much as you will ever through at it
.MMR actually takes out aluminum blocks and put in the cast iron romeo or windsor blocks for 900hp+
06-25-2008, 03:51 PM
#5
3rd Gear Member
Join Date: Mar 2007
Location: Where gunshots are more common than birds chirping
Posts: 504
RE: Romeo max?
ORIGINAL: oxfordgt
The Cobra block is the exact same block as the GT romeo block the only difference is that it was machined for 4 bolt mains.
They will handle 1400+
The Cobra block is the exact same block as the GT romeo block the only difference is that it was machined for 4 bolt mains.
They will handle 1400+
06-25-2008, 04:00 PM
#6
6th Gear Member
Join Date: May 2006
Location: Ohio
Posts: 6,448
RE: Romeo max?
Hey 35th For some reason when I try to post in your thread i get an error. So I wasnt knocking you or what you did just that i didnt understand why. I have grown up doing more with less so that isthe way I Think and for $7000 and a sc set up already I would have made 600rwhp. But congrats on what you did.
Sorry for the thread jack but I already answered your questions so I dont care
Sorry for the thread jack but I already answered your questions so I dont care
06-25-2008, 04:40 PM
#7
3rd Gear Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 830
RE: Romeo max?
ORIGINAL: oxfordgt
The Cobra block is the exact same block as the GT romeo block the only difference is that it was machined for 4 bolt mains.
They will handle 1400+
The Cobra block is the exact same block as the GT romeo block the only difference is that it was machined for 4 bolt mains.
They will handle 1400+
06-25-2008, 04:46 PM
#8
6th Gear Member
Join Date: May 2006
Location: Ohio
Posts: 6,448
RE: Romeo max?
If you can find a teksid for only $300-$400 then get it but I doubt it unless you find an idiot that doesnt know what hes selling. I always use romeo blocks and I always buy them used. Brand new fresh blocks are not the best choice for high hp engines.
06-25-2008, 04:58 PM
#10
3rd Gear Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 830
RE: Romeo max?
ORIGINAL: oxfordgt
If you can find a teksid for only $300-$400 then get it but I doubt it unless you find an idiot that doesnt know what hes selling. I always use romeo blocks and I always buy them used. Brand new fresh blocks are not the best choice for high hp engines.
If you can find a teksid for only $300-$400 then get it but I doubt it unless you find an idiot that doesnt know what hes selling. I always use romeo blocks and I always buy them used. Brand new fresh blocks are not the best choice for high hp engines.
Here's one for 275 and this isnt an uncommon price for them from what I have seen.