Epic91GT

i got a 03 mustang gt and i want to build the rear end b4 i start with any major engine work this way it says me a headache in the future. by the time im done reading this thread i wanna be a rear end expert haha thanks in advance

MustangGT03

I always heard its best to have a rear end shop do it for you, that way you know its done right.

Epic91GT

i beleive that i could do it myself but im talking about what components am i gunna need

02 Ninja

Good place to start
http://www.latemodelrestoration.com/...1&comp=LRS

http://www.latemodelrestoration.com/...1&comp=LRS

http://www.latemodelrestoration.com/...1&comp=LRS

http://www.latemodelrestoration.com/...1&comp=LRS

Epic91GT

would 4.10s be a good option if i plan f/i in the future or should i get the 4.10s and just wait it out

jRock617

4.10s with a twin screw will probably end up spinning your tires wayy too much. consider either 3.73s or go with a centri blower with the 4.10s

Epic91GT

what about 3.73s with a centri? and should i buy both gear sets now or should i figure out what im doing and pic one set?


which would b better for either a single turbo or tt setup

Epic91GT

ttt

MachWon04

Is anything other than 31 spline axles and diff and the cover requires to build an indestructible rear?

H0SS302

31 spline dif and axles... and 4.10s