4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

vortech blown cobra loves to hesitate help me

Thread Tools
 
Search this Thread
 
Old 07-28-2008, 09:42 PM
  #1  
phillyphan56
2nd Gear Member
Thread Starter
 
phillyphan56's Avatar
 
Join Date: Aug 2006
Location: North Wales, PA
Posts: 216
Default vortech blown cobra loves to hesitate help me

ok so i have a 99 cobra with a v-2 vortech setup with the maxflow powercooler system. just had a new O2 sensor, serp. belt, ,fuel filter, and efi/injector service done. but it still hesitates/bucks me around at lower range of rpm's. has 35,800 miles. plugs are autolite not sure on wires - done in 2002 with 20k miles (put on with blower). stock maf and throttle body i believe. 42lb injectors. i plan on doing a tuneup tomorrow with bosch or ngk plugs and wires hoping it will work. if it doesnt however what could it be?
phillyphan56 is offline  
Old 07-28-2008, 09:48 PM
  #2  
livefast1
5th Gear Member
 
livefast1's Avatar
 
Join Date: Jul 2007
Location:
Posts: 2,363
Default RE: vortech blown cobra loves to hesitate help me

i dont think 99s have wires, i know 2vs dont 99 and up and im pretty sure your 99 4v has coil on plugs.
livefast1 is offline  
Old 07-28-2008, 09:59 PM
  #3  
jhell00
Possible Scammer
 
jhell00's Avatar
 
Join Date: May 2008
Location: minnesota
Posts: 343
Default RE: vortech blown cobra loves to hesitate help me

don't get bosch! go with ngk! tr6
jhell00 is offline  
Old 07-28-2008, 10:15 PM
  #4  
phillyphan56
2nd Gear Member
Thread Starter
 
phillyphan56's Avatar
 
Join Date: Aug 2006
Location: North Wales, PA
Posts: 216
Default RE: vortech blown cobra loves to hesitate help me

oh right right im thinking of my old 98 with the wires my bad haha ok so ill look into NGK plugs hopefully it wont need new coils
phillyphan56 is offline  
Old 07-28-2008, 10:26 PM
  #5  
livefast1
5th Gear Member
 
livefast1's Avatar
 
Join Date: Jul 2007
Location:
Posts: 2,363
Default RE: vortech blown cobra loves to hesitate help me

is the setup dyno tuned?
livefast1 is offline  
Old 07-28-2008, 10:30 PM
  #6  
phillyphan56
2nd Gear Member
Thread Starter
 
phillyphan56's Avatar
 
Join Date: Aug 2006
Location: North Wales, PA
Posts: 216
Default RE: vortech blown cobra loves to hesitate help me

yeah itwas when the blower was installed back in 02 with the autolite plugs 42lb injectors heavy duty fuel pump a chip provided by vortech and the computer was reprogramed. since then i put a full exhaust system on it thats about all i did mechanically the rest was show stuff
phillyphan56 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Thunderball
4.6L (1996-2004 Modular) Mustang
15
11-22-2015 11:49 PM
88 orangepeel notch
Street/Strip
4
10-05-2015 09:03 AM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
bradleyb
California Regional Chapter
0
10-01-2015 01:02 AM
Suree_Mustang_2009
New Member Area
3
09-25-2015 12:58 PM



Quick Reply: vortech blown cobra loves to hesitate help me



All times are GMT -5. The time now is 03:49 PM.