blee69mustang

looks like a great deal, but im wondering what else would i need for this to fit on my car(98gt). if even plausible.

H0SS302

have u learned nothing from this site! lol.. your gonna need an adapter made for your lower intake.. and its gonna cost more than its worth. just buy a used vortech and save yourself the trouble.

blee69mustang

no, i read about this a longggg time ago but i needed a refresher. where could i get the adapter for the lower intake? i had some site booked marked that talked about all this but i cant find it now

35thAnni99GT

^^ What he said. There are actually are companies that make the adapter, but the main issue I would see is that the Eaton becomes inefficient after you try to crank much more than 15-16 psi out of it. For how much the adapter, blower, labor/tuning, and miscellaneous parts (vacuum harness, wiring, etc.) is going to run you, it is probably going to be a better deal to buy a twin screw setup.

blee69mustang

alright thanks. jw but do you know what companys do make all the adaptor stuff and everything else?

steve0914

blee, it is going to cost you more to go with this setup... i was going to get one for free, and didn't

blee69mustang

alright thanks guys i was seriously gonna try and do it. but im down for an easy s/c project not this complex one haha. alright im not gonna do it i just wanted a refresher on how hard it was

35thAnni99GT

here is the link. good luck.

99-04 GT Manifold for M112